Spare & Accessories
Older models of Dataterm from early EMS+ to Dataterm IHC up to 2005.
Our service stock area should have the spares you need.
Dataterm IHC and ALL remote sensors MUST be wired using our own screened cable which has been specially made to enhance the power / signal to the Dataterm and to prevent interference if connected correctly. It is similar in size to telephone cable but that's where the similarity ends, easy to work with and conceal. Low cost high quality foil sheath and drain wire resulting in 3 cores and shield.
Erratic operation may be experienced if not used. SOLD BY THE METRE! USE QTY TO SELECT YOUR REQUIREMENT.
More Details
This is the wiring centre PCB for all Dataterm IHC Standard and Combi versions controlling either heating and hot water or just heating. If you have an IHC then this is the PCB to replace the wiring centre PCB if yours develops a fault. It is the version for Dataterm with the backlight but can also be used for earlier versions of Dataterm IHC without a backlight. Will not work with MK2 or EMS+ Dataterm models!
More Details
Replacement EMS+ or MK1 / MK2 Dataterm switching centre PCB to replace all EMS+ MK1 and MK2 Dataterm wiring centre PCB's. Refurbished stock with 12 month guarantee (service stock - when available). Easily swapped with existing PCB. If we do not have this item in stock we recommend you call us to arrange the repair of your existing Dataterm or simply purchase the Dataterm IHC Upgrade Kit. This is a part exchange service, we send you the replacement, and you send the faulty one back once the replacement is fitted, simple..."
More Details
If you already have a Dataterm IHC then this will replace your existing programmer should it develop a fault. The Dataterm IHC Combi will control 1 heating zone only and does not have a hot water facility. Your existing Dataterm must have a BACKLIGHT for this product to work!
From time to time this product may vary in model MK3 or MK4 and backlight colour depending on available stock. If you do not have a backlit version please purchase the upgrade kit as it will be the latest version - Heating Controls - Dataterm IHC Upgrade Kit - Heating & Hot Water - Warmworld
More Details
If you already have a Dataterm IHC then this will replace your existing programmer should it develop a fault. The Dataterm IHC Standard will control 1 heating zone and hot water. Your existing Dataterm must have a BACKLIGHT for this product to work! This is also known as the Dataterm IHC MK3 and can be supplied with a white and chrome keypad if the original grey keypads are not available. From time to time this product may vary in model MK3 or MK4 and backlight colour depending on available stock. If you do not have a backlit version please purchase the upgrade kit as it will be the latest version - Heating Controls - Dataterm IHC Upgrade Kit - Heating & Hot Water - Warmworld
More Details
These powerful diagnostic tools will allow you to connect to your Dataterm via a Mini USB Lead and download data such as heating plan set, set temperature, actual temperature and will even allow you to name your own plans, for instance zone 2 could be the bedrooms so you can name the plan associated with zone 2 "Bedrooms" or anything you like making it easy to identify what plan does what. All records and statistics are available complete with a graph showing the previous six days, you can even re-program the Dataterm from your PC or turn the heat or hot water on or off. Mini USB Lead required, for use with Dataterm IHC MK4 ONLY! Not Suitable For Mac O/S Windows Only! WORKS ON WINDOWS XP, VISTA AND WINDOWS 7 PRO 64 BIT - TESTED AND KNOWN TO WORK ON WINDOWS 8 AND 10, 32 / 64 BIT.
More Details
- 1
- Showing 1 - 6 of 6 results